Teco Welded Masonry Joist Hanger - 75 x 225mm

The WM Welded Masonry Joist Hangers is designed to support timber joists built in to brick or block walls with a minimum crushing strength of 3.5N/mm. It is also suitable for many timber to timber and for timber to steel applications. The masonry flange should be securely fixed to the timber or to steel beams using appropriate fixings.

Features:

• Flexibility of design means as well as the standard sizes shown the WM can be manufactured in any size to order
• 2.4mm thick

Installations:

• The back plate of the hanger should lie flat against the vertical masonry support
• The masonry flange should never be placed in dry slots
• Masonry flange should have a minimum of 3 courses (675mm masonry) above
• Use correct strength mortar as per British Standard
• Both supporting and above masonry should be allowed to mature before any load is applied
• Joist should be square cut and sit tight to the back of the hanger - maximum gap permitted is 6mm
• Nail the side flanges with 30 x 3.75mm galvanised square twist nails or equivalent
• To provide lateral restraint HD Straps should be used
• Use appropriate corrosion resistant fixings. Do not use galvanised fixings with stainless steel products or vice versa